Intumescent Paint for Timber

  • Anti-virus test standards.

  • BS EN Class B s1 d0, officially compliant to old Class 0.

  • Reduction of human coronaviruses in just 2 hours in approved ISO 21702.

  • Bacteria reduction in 24 hours in ISO 22196 tests.

  • Protects from toxic gases & smoke as well as flamespread.

  • BS4800, RAL, NCS 5,000+ colours.

ITC intumescent paint

Heat from fire causes a catalytic reaction within the smoke and flame retardant finish to emit an instant surface flame and smoke suppressant non-toxic vapour. Heat from fire then causes catalytic compound in ITC Paint Insulating Basecoat to react, making a “blowing agent” generate an internal foaming action contained within ITC Paint by a “char former”as it makes the char former expand. The char former creates a dense insulating layer. The insulating layer is hardened by hardening agents and given extra firmness by fire resistant fibres for lasting protection after expansion.


Coronavirus, Influenza & Bacteria

Coronavirus, flu and harmful bacteria remain contagious on emulsion painted walls for weeks. Surfaces coated with ITC Paint’s highly concentrated mix of safe, encapsulated nano-particle biocidal metals damage the shells of human coronaviruses and flu and the membranes of bacteria, so their death is greatly accelerated on the surface, they become vulnerable to our antibodies and their spikes ability to penetrate and act as a viral pathway into our lungs is notably reduced.


Anti-Virus Test Standards

Coronaviruses & Bacteria killed fast after they land on walls or wood protected with intumescent-paints Anti-Microbial SFR.


Human coronavirus

91.5% reduction of human coronaviruses in just 2 hours in approved ISO 21702 virus microbiology laboratory coated surfaces tests 16 Dec 2020.


Infectious bacteria

99.9% bacteria reduction in 24 hours in ISO 22196 tests for coated surfaces 5 Feb 2021.


ITC Paint provides permanent protection to supplement rather than replaces good hygiene.


Flamespread & Smoke

Wood and wood based boards are flammable, spread and intensify fire. In a fire ITC Paint insulating basecoat expands to create a firm fire-resistant insulation. ITC Paint Anti-Viral Smoke & Flame Retardant emits a nontoxic flame suppression vapour. Just one coat of each provides effective fire protection for internal wood to the approved standard for all areas including corridors, stairs entrances as well as rooms.



  • 1 coat ITC Paint Insulating Basecoat
  • 1 coat ITC Paint Anti-Viral Smoke & Flame Retardant
  • Brush, dense woven pile roller, spray

Finishes, Colours & Sizes

  • Available in a BS4800, RAL, NCS 5,000+ colours
  • Matt and Satin
  • Sold in 20sqm and 80sqm cans to avoid error


To Specify

We are happy to provide a quote please fill in our Specification Form to ensure we cover all aspects of your fire protection and decorative requirements in our quote. We accept any order size.


Prior to application the contractor should contact the Technical Department (see below) to obtain a basecoat application schedule.


For help please speak to the technical team on: Tel: 01329 841 416 or Email:


Fire Test Standards

BS EN Class B s1 d0, officially compliant to old Class O, with full smoke control s1 and zero flaming droplets d0. ITC Paint system gives permanent, effective fire protection.


For certification and compliance with regulations the manufacturer will supply a Certificate of Supply on request.


Durability & Microbial Resistance

High concentration of pure acrylic resin hardenend and smoothed with polyurethane avoid microbial safe havens created by all the cheap powders in even the most expensive very matt emulsions, making ITC Paint suitable for areas subject to regular cleaning regimes. ITC Paint’s metal-based biocides do not leach out with humidity or during cleaning to provide permanent virus and bacteria protection.


Application Conditions

  • Min temp 5°C, Max RH 75, Min 3°C above dew point
  • Do not apply if condensation or extra-fast drying possible
  • Seal leaching stains & knotts with acrylic compatible stain sealer



We have technical representatives who provide assistance in the selection and specification of the products on this site and should be consulted for exact installation and product suitability. Ensure an early engagement with ourselves, designers, main contractor and specialist installers before any installation. Other trades and/or manufacturers may need to be consulted. For in-depth information, specification and technical advice please call our Head Office on Tel: 01329 841 416 or Email:



All interested parties, designer, specifier, main contractor and specialist installers should provide access to allow the fire stopping seals to be regularly inspected and maintained, as well as records kept of such maintenance at minimum periods of 12 months, as required by the Regulatory Reform Order, and repaired if necessary. Reference should be made to ASFP TGD 17 – Code of Practice for the Installation and Inspection of Fire Stopping.



It is vital that those entrusted to design or install a fire stopping product have the necessary levels of competence to undertake the task professionally and thoroughly. The level of competency required will be commensurate with the expected complexity of the building. All designers must eliminate, reduce or control foreseeable risks that may arise during installation, construction or maintenance when preparing or modifying designs. Clients should ensure that the principal designer and principal contractor carry out their duties under CDM regulations. The ASFP foundation course in passive fire protection provides essential knowledge as part of demonstrating competency and understanding in this key fire protection specialism.


Additional Notes

This product can only be supplied once the Paint enquiry form has been completed and approved by the manufacturer: Click the following link to go to the Paint Form: Specification Form.


Health and Safety

The product does not present any known health hazards during or after installation. Normal good industrial and personal hygiene practices should be observed. For further information on health and safety please see the Safety Data Sheets (SDS) or please contact the technical team on Tel: 01329 841 416 or Email:


More information / Data sheet

For more information please click the button below to download a printable PDF file for ITC intumescent paint products.

The above information to the best of our knowledge is true and accurate and based upon current test data and is supplied for your guidance only. Customers should satisfy themselves to the suitability of the product in its intended use and no guarantee is given or implied since the conditions of actual use are beyond our control. We disclaim any liability for loss, damage or other expense arising from the use of information, data or products mentioned or referred to and reserve the right to change any details or specifications without notice.

Web Page


Copyright © intumescent-Paint 2023. Unit 9, The I.O Centre, Stephensons Road, Segensworth, Fareham, PO15 5RU

tel: 01329 841 416 | email: